Heat Guns – More Than Just Safely Removing Paint

Uses Of Heat Guns

Apart from removing paints, heat guns are often used in home and workshops for various other purposes. A few among them are mentioned below:

1. You can buy heat gun online for removing old floor tiles, bumper stickers, decals and several other materials that are fixed with glue.

2. Floor tiles are fragile when cold and can break down when cut to fit into clenched places such as around pipes or molding. Heating the tile with a heat gun makes the process of cutting much easier and more precise.

3. Heat gun is often used to soften the putty around doors and windows. This makes the compound easier to scrape off.

4. To thaw frozen pipes, buy a heat gun, easily available online, as it is much safer than a torch with an open flame. Be careful on soldered joints as the gun can heat the solder if held in place for too long.

How To Use a Heat Gun?

Heat gun is known to remove paint quickly, thereby creating less of a mess than a chemical remover. The gun can work both on latex or oil-base finishes. However, it cannot remove a stain that has soaked into wood.

Install the nozzle before turning the heat gun on. Generally, there are two types of nozzles - one with wide-flare used for most paint-removing jobs, and the round nozzle that works great where heat must be more localized. It is up to you to determine which nozzle is best for a particular job. However, if you need to change nozzles later, cool it for at least five minutes before removing the hot nozzle.

It is necessary to heat only a few square inches at a time and scrape the softened paint off immediately. Prevent the use of nozzle in one place for too long. This will char the paint and wood.

Safety Tips

Once you buy a heat gun online and start using it, you must be aware about the safety precautions you need to follow.

1. You must wear a respirator mask to protect yourself from fumes of the paint.

2. While using this tool, it is necessary to work in a well-ventilated area. That said, opening a window must not be the only option. Either work outdoors or turn on your exhaust fans.

3. Wear a separate set of work clothes and make sure they cover your arms and legs. Be extra cautious by wearing gloves and safety goggles.

4. Heat guns reach high temperature sometimes. Stick to the handle and don't touch the airflow of the tool or the barrel.

5. If you are using an extension cord, make sure it is a heavy duty cord that can carry the load.

6. It is vital to remove paint that has stuck into the nozzle, or else it may create a fire hazard.

Whether you are a professional or have started using this efficient tool from some time now, following the above mentioned safety tips will ensure that neither your work nor productivity gets hampered.

Full PP material window mounted exhaust fan